This waterbutt is finished in an attractive black finish and is made from durable plastic.

It has a capacity of 100 litres and comes complete with a tap and a lid which has secure fit.

950mm x 380mm x 380mm

*Please note - stand sold separately

This mechanical device is designed to automatically open and close a louvre vent, in response to temperature.

A wax-like substance, contained in the cylinder, expands with heat, operating a piston which opens the louvre via a linkage arm. As the temperature falls, the process reverses, and a spring closes the louvre. There is also an adjustment knob, which enables the opening temperature to be altered to between 15 and 25 degrees centigrade.

Some simple drilling is required to fit the opener to the side of the louvre vent.

Hand made by us in our Staffordshire workshop, trade enquiries welcome from all around the world

This product does NOT fit the Hercules OCTAGONAL range of buildings

At just 18" wide, this greenhouse staging is ideal for small greenhouses (e.g. 5' or 6' wide). The sections are 22" long and you can bolt as many together as you wish. (e.g an 8' run would be four sections bolted together and would therefore be 7'4" long- ideal to fit into an 8' gap)

Made from sturdy aluminium, the frame supports 1" deep aluminium trays. All the trays have a double folded edge, for safety.

Height: 32" / 813mm

This British made staging is extremely strong and is very versatile due to its size. Each staging has 16 corners braces for superb rigidity and has Canadian cedar wood slats which carry natural preservatives within it, making it resilient to rot. In addition this should mean no treatment will be required for up to 10 years.

With 3 tiers, this allows maximum use of the space and storage, and gives you the ideal working height for 'potting up'. Ideal for 2' wide greenhouses, such as the Simplicity Sandon 4'x2', Simplicity Mini Lean-to and Vitavia Ida.

Please not that the size given is nominal and in actual fact this staging comes up slightly smaller than 2' so that it can sit within a 2' wide space or greenhouse. All Caverswall staging is delivered flat packed for self assembly, however full instructions are supplied.

The height of this Staging is 930mm/3'1" high

W 57.5cm L 57.5cm H 93cm

This new staging consists of an extremely sturdy aluminium frame (each piece of staging has 16 corner braces for superb rigidity).  The tops are made from tanalised timber slats (pressure treated so that you never have to re-treat).

Please note that we say 4' for the sake of clarity, in fact they are a bit smaller so that they fit into the greenhouses well.  All Caverswall staging is delivered completely flat packed for self assembly.

The height of this Staging is 930mm/3'1" high

 This new staging consists of an extremely sturdy aluminium frame (each piece of staging has 16 corner braces for superb rigidity).  The tops are made from tanalised timber slats (pressure treated so that you never have to re-treat).

Please note that we say 2' for the sake of clarity, in fact they are a bit smaller so that they fit into the greenhouses.  All Caverswall staging is delivered completely flat packed for self assembly.

The height of this Staging is 770mm/2'7" high

W 57.5cm L 57.5cm H77cm

Ideal for 6ft wide greenhouses, the 2ft width will not obstruct the doorway. The working height is 2'6".

Made from aluminium with 16 supports at the corners it is a very sturdy piece of staging. The slatted tops are Western red cedar which offers resistance to some greenhouse pests and doesn't need to be treated.

Arrives flat packed for self assembly.

Width: 57.5cm  Length: 113.5cm  Height: 77cm

You can improve the ventilation in your greenhouse by adding roof vents. They ensure that your greenhouse does not over heat as well as providing clean healthy air to your plants. Please note if you are ordering a new greenhouse, we will automatically adjust the greenhouse to fit this roof vents. The more ventilation in your greenhouse, the greater variety of plants you can grow.

Made from aluminium and comes complete with 5 toughened glass slats. 

Add louvres to your greenhouse to improve air circulation and prevent plants diseases. The louvre replaces a 24" x 18" (610mmx457mm) piece of glass, however if you are ordering this louvre with a greenhouse, we will adapt the glass plan for you accordingly.

It comes with a manual handle so that you have complete control of the air flow, however if you wish for this to be automatic opening according to the temperature, then team it up with the thermoforce auto-louvre opener. 

Suitable for the 100l Slim Waterbutt. This stand raises the water butt high enough to be able to place a watering can below the tap. This item is essential if you don't intend to make your own stand for your waterbutt.

Diameter 17.5"/45cm (bottom) 16"/41cm (top)

Height 12"/30cm

These amazing devices are made in our own workshop in Staffordshire

• Opens your greenhouse roof vent automatically as the greenhouse heats up

• Provides ventilation to plants when they need it most

• No electricity required - powered by heat expansion alone!

• Easy to fit - adaptable to any aluminium or wooden greenhouse On most aluminium greenhouses, it simply clamps on.

Fitting an auto opener can help you regulate the temperature in your greenhouse and maximises the potential of the roof vents. Controlled by heat alone they do not take batteries or need an electricity supply.

The unit can be adjusted to change the operating temperature to suit.